Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

charge cooling

Status
Not open for further replies.

Vapo

Automotive
Joined
Dec 6, 2002
Messages
3
Location
GB
wondering if anyone's heard about the cryogenic system that uses CO2 to cool aair as it enters the intake manifold....I found a site on the internet that sold the system but been searching like mad and cant find it again....HEELP !!
 
I have heard of LIQUID propane being injected upstream for use as charge cooling. PWM control with a tfe valve. The stuff looks blue. Problem is its only good for drags. The tank freezes up and discharge pressure drops to zero.
 
The company is called DEI and the parts can be purchased at Jegs.com or summitracing.com. I think it's kinda pricey for what it is tho.

Mike
http:\\
 
You should read some points in another thread called fuel Temperature. IT will offer some additional thoughts for you to add to yours.

Shaun TiedeULTRADYNE Arl,TX(stiede@ev1.net)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top