~ characterr in notes

[mousepotato]

Hi,

Can anybody tell me how to include ~ (tilde) character in notes?
Any help will be appreciated.
Thanx in adv.

Running Nx8 on TCE , Win 7

 

[Arkance/PhoeNX]

I'm assuming that you're using the NX Blockfont?
Try changing the font to a Truetype one and you should get it.


Anthony Galante
Senior Support Engineer

NX5.0.6, NX6.0.5, NX7.5.5, NX8.0.0 -> NX8.0.3
NX8.5.0 -> NX8.5.3, NX9.0.0 -> NX9.0.1

 

[JohnRBaker]

If you're running NX 8.0 simply use any of the TrueType fonts and you can have all the 'Tildes' ( ~ ) that you want.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[mousepotato]

It so works!!!
Thanks John and PhoeNX
But is there any possibility to do this using only BLOCKFONT? As we have to keep the FONT uniform in all the drawings here...

Any help would be appreciated..

 

[jerry1423]

I see your problem was solved but
if anybody is wondering about the tilde in NX7.5 then check out this thread

http://www.eng-tips.com/viewthread.cfm?qid=360498