Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Changing locked material thickness thread562-220644

Status
Not open for further replies.
satos

satos

Mechanical
Joined
Dec 26, 2011
Messages
1
Location
SK
thread562-220644

Solid edge sheetmetal part, ordered enviroment:
1/ Suppress all the features.
2/ Change the enviroment to Synchronious
3/ Create the TAB and entry the different/new material thickness by keyboard.
4/ The thickness in the material table should by unlocked. Check it and change it if it works.
5/ Delete the TAB created "above".
6/ Unsuppress the features.
 
Status
Not open for further replies.

Similar threads

MatthewLyons
  • Locked
  • Question Question
Changing the default 'Author' of a part
Replies
1
Views
345
Kenny_G
Kenny_G
bgriesel
  • Locked
  • Question Question
save as pdf creates a locked file
Replies
3
Views
314
bgriesel
bgriesel
nastynotion
  • Locked
  • Question Question
Changing the default user of Solid Edge
Replies
6
Views
473
davemerritt
davemerritt
vatexan
  • Locked
  • Question Question
holes locked down
Replies
2
Views
170
kwikool
kwikool
marlon2s
  • Locked
  • Question Question
Is it possible changing all dimensions proportionally?
Replies
2
Views
175
marlon2s
marlon2s

Part and Inventory Search

Sponsor

Back
Top