Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Changing lbmass to lb
- Thread starter shell7771
- Start date
Dear Shell;
Double click in the bill of material and scroll over to the mass or weight column. Right click on the column and select column format. Click apply units format and make sure display units type is unclicked. You can also rename the column to something more normal like "WEIGHT" and edit the units display so that precision is a little more realistic than three decimal place default.
Once you have the units displaying to your liking you can save this to a sheet format so you can reuse this BOM convention for your next drawing.
Best Regards
Adrian Dunevein
Double click in the bill of material and scroll over to the mass or weight column. Right click on the column and select column format. Click apply units format and make sure display units type is unclicked. You can also rename the column to something more normal like "WEIGHT" and edit the units display so that precision is a little more realistic than three decimal place default.
Once you have the units displaying to your liking you can save this to a sheet format so you can reuse this BOM convention for your next drawing.
Best Regards
Adrian Dunevein
- Status
Similar threads
- Locked
- Question
