Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

changing EOS parameters of POLYPCSAFT??

Status
Not open for further replies.
slider527

slider527

Chemical
Joined
Aug 25, 2009
Messages
1
Location
NL
so i'm working on a conceptual design project and i want to change some associative parameter between H2O and H2S for the POLYPCSAFT equation of state in Aspen Plus..

does anyone know how to do this?

Regards,
Mario
 
Status
Not open for further replies.

Similar threads

BSMEclassof2012
  • Question Question
Premature Deterioration of Ozone Diffuser Gaskets – Request for Support
Replies
3
Views
4K
btrueblood
btrueblood
1946ladjal
  • Locked
  • Question Question
Trim Bed for adsorption of heavy aromatics
Replies
2
Views
2K
1946ladjal
1946ladjal
Vivaldi M. Smith
  • Locked
  • Question Question
High High trip of a natural draft Heater stack temperature
Replies
3
Views
2K
Vivaldi M. Smith
Vivaldi M. Smith
ritesh bindal
  • Locked
  • Question Question
Doubt in the represntation of the PID Controllers in P&ID diagram
Replies
1
Views
1K
Heaviside1925
Heaviside1925
yamoffathoo
  • Locked
  • Question Question
Does aeration of a vinyl acetate based emulsion containing carbon fibers reduce LDV?
Replies
3
Views
1K
yamoffathoo
yamoffathoo

Part and Inventory Search

Sponsor

Back
Top