Changing colours....

[MoeMoe7]

So, I have to change the colour of many components in a sub-assembly. I have to do this because...well... its a long story and involves a gnashing of teeth...

So. I have an assembly (A) which has several sub-assemblies (B1 to B5), which each have several sub-assemblies...and so on.

How do I change the colour of a sub-assembly at the component level. That is; if I choose sub-assy B1: ALL the components change to a certain colour down to the component level; so that when I open each individual component they are also that colour?

I know that changing the assy colour changes the colour in that assy, but not at the component level. Is there a way to do this? or does someone have a journal file for this?

Thanks!

Mauricio Haliska
Eng. Mgr.

http://www.Metrican.com

 

[studiotreccani]

Hi,
try this:
from the assembly
select object display (ctrl+j)
force selection to face, solid... (NOT THE COMPONENT)
and see the immagine attached


NX 7.5
www.studiotreccani.com

 

[jerry1423]

and to force the selection to faces and solids
you need to go into the Type fiter
and make sure only Face and Solid
are highlighted