Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Change the output file format using OUTPUT (XYOUT)

Status
Not open for further replies.
shellp70

shellp70

Mechanical
Joined
Apr 3, 2013
Messages
19
Dear everyone,

I use OUTPUT (XYOUT) to plot the data. The format of output file is .plt . Does anyone know how I can change the output file format from .plt to something else ?!

Thank you !![glasses]
 
Status
Not open for further replies.

Similar threads

T
  • Locked
  • Question Question
Importing sketch file from Solidworks
Replies
1
Views
3K
Onda
Onda
ataseventurgut
  • Locked
  • Question Question
No Results File was selected and the Results File bending.frame1.xdb for job bending.frame1 does not
Replies
2
Views
637
ataseventurgut
ataseventurgut
nmruble
  • Locked
  • Question Question
Bush Element /Spring Element, what is the difference?
Replies
1
Views
1K
dmapguru
dmapguru
Gabriel93
  • Locked
  • Question Question
Error 4521 (elements perpendicular to their coordinate system x-axis)
Replies
0
Views
855
Gabriel93
Gabriel93
Kevin_O
  • Locked
  • Question Question
Differences in results using SHELL EQUIVALENT SECTION
Replies
0
Views
303
Kevin_O
Kevin_O

Part and Inventory Search

Sponsor

Back
Top