Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Change the material of a set of elements
- Thread starter renanmp12
- Start date
IceBreakerSours
Bioengineer
You should step back and take some time to go through the Getting Started guide.
*********************************************************
Are you new to this forum? If so, please read these FAQs:
*********************************************************
Are you new to this forum? If so, please read these FAQs:
- Thread starter
- #3
IceBreakerSours
Bioengineer
I am not entirely sure what your question is but here is how I assign a material to an element set.
#1. Create an element set
#2. Create a section that refers to a material
#3. Assign the section created in #2 to the set that was created in #1
*********************************************************
Are you new to this forum? If so, please read these FAQs:
#1. Create an element set
#2. Create a section that refers to a material
#3. Assign the section created in #2 to the set that was created in #1
*********************************************************
Are you new to this forum? If so, please read these FAQs:
- Status
Similar threads
- Locked
- Locked
- Question