Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Change text style globally

Status
Not open for further replies.

trinkit

Mechanical
Joined
Oct 8, 2006
Messages
16
Location
US
We receive a fair amount of AutoCad drawings from outside sources that we would like to use for xref's. However, the fonts are all over the map and we would like to be able to change the fonts to our company's standard, but we'd like to be able to do it with as much ease as possible. Is there a way to change ALL the text of one style to another style, without having to change each piece of text individually? We are using Architectural Desktop 2004 and will be changing to ABS2007 within the month.

Thank you.
 
Hi,

select the text, mtext with "_qselect".
Maybe you would find a lisp.

Lothar

ADT 2004
 
Thank you, Lothar, but I must be doing something wrong, because it is not working.
 
Actually, the "select" is working, but now I can't figure out how to change the text style. Working on coming up with a lisp.
 
The problem is trying to edit the text without the dialog box coming up and I can't figure out how to edit text from the command line.
 
Finally got it! Thank you!
 
You should be able to edit the style of the text/mtext in the properties dialog box (Ctrl+1) after you have selected them; if you select ALL, you can edit just the text/mtext with the selection type drop down at the top of the dialog box.

____________________
Acad2006, Terramodel
 
Does the "Style" command help at all?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top