Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Change Templates in Inventor 9 Drawing File

Status
Not open for further replies.

ppersiani

Mechanical
Joined
Nov 5, 2003
Messages
10
Location
US
Hello,

I am working on a drawing file and would like to change templates without starting a new drawing from scratch. I have looked through all of the online help and can't seem to find any info on this. Any help would be appreciated.

Thanks,

Paul R. Persiani
Tustin, CA
 

From the browser in Inventor of the drawing with the template that you want, right click on the border or title block that you want and select copy. Then go to the other drawing and paste it into the other drawing. You will need to delete the template already in the drawing before you can place the new one. If you are using the custom tab in iproperties to define the fields in the template they will all update automatically.

-Brian
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top