Change obj. from PS to MS

[KThomson]

Hello -

My previous years of background with CAD never fully utilized the wonders of the model space vs. paper space - Now I am getting the hang of it but I have a question.

Is there a quick way to change something I drew accidently in PS to MS? (without "copy" switch to MS "paste" - or is this the fastest way??)

Thanks!!

Kate

 

[rKeyTek]

If you have the "Express Tools" ... go to "layout tools" in the "Express" pull down.
The 1st LISP should be "chspace".
This routine should do it for ya in a snap.

If you don't have it ... sorry in advance

R.

 

[CADaver]

Express Tools -> Layout Tools -> CHSPACE

 

[KThomson]

I have express tools, but no "layout" tools... I'll look into it and ask our CAD guy.

Thanks for the help!!!

 

[CADaver]

You must be using R14. As I recall, it was in the MODIFY or TOOLS section of the R14 Express Tools pull-down. But, if Express Tools are loaded, you should be able to key-in CHSPACE.

 

[KThomson]

CADaver -

Actually I have AutoCAD2000. And typing it doesn't work either.

But thanks for your help - I appreciate it!!!

 

[KThomson]

A-HA!!!

Just talked to the cad guy... I don't have the latest version of Express tools! He'll update me on Monday.

Thanks all!

 

[chicopee]

when your are in paper space, open a viewport and any drawing in model space will show itself automatically. Just think of a viewport in P.S. as a cut out thru a blank sheet of paper. P.S. is normally used for the titleblock and border for your drawing.