Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

CGR with multiple solids, Show/Hide just one solid

Status
Not open for further replies.

JRW261

Mechanical
Joined
Feb 26, 2004
Messages
41
Location
US
I have several CGR's that when combined make a very large assembly. All of the CGRs that make up this assembly have many solids in them and I need to Hide/Show the solids individually. Is there any easy way that I can select an indivual solid or does V5 see them as one combined solid because they are in the same CGR file?


Thanks in advance.
 
Yep. As far as CATIA is concerned, they are one part, and will be hidden or shown as a single part.
 
Hi,

We do have this problem sometimes... Only way i correct this is rebuild CGR from CATPart or .model then manually relink those CGR to Product...

Eric N.
indocti discant et ament meminisse periti
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top