sleeprcmaro
Materials
im have severe blistering problems with my ceramic injection cores at my shop im use a tempcraft wax injection machine converted to a ceramic injection machine can anybody please help
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
ceramic injection blisters help!!!!!!!!!!! 1
- Thread starter sleeprcmaro
- Start date
- Status
-
1
- #2
Dear sleeprcmaro,
I suggest taking a look at your mixing procedure. Improperly mixed injection molding material will have areas of low and high wax concentrations, which means a not uniform binder removal/burnout. The next thing would be the ceramic particle packing. There are additives you can mix with the ceramic lower surface tension, and allow for better mixing.
Best Regards,
Genesis Genesis
I suggest taking a look at your mixing procedure. Improperly mixed injection molding material will have areas of low and high wax concentrations, which means a not uniform binder removal/burnout. The next thing would be the ceramic particle packing. There are additives you can mix with the ceramic lower surface tension, and allow for better mixing.
Best Regards,
Genesis Genesis
- Thread starter
- #3
sleeprcmaro
Materials
what additives are available to lower surface tension in ceramic injection mix?
- Status
Similar threads
- Question
- Locked
- Question