Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

CEMP 7.5kw

Status
Not open for further replies.
Feg

Feg

Mechanical
Joined
Oct 2, 2003
Messages
77
Location
IE
Hi,

I am wondering if any of you guys can comment on this, we have a CEMP 7.5kw 720 rpm 50hz Motor EEXD IIT4 17.5A 400/690V 3ph IP55 working outside the fan in an amb of approx 10 deg C. We had a thermographic study of the motors done and the image shows 115.6 deg C in the middle of the motor frame, the current being drawn is 11.6 amps. All 5 of same motors are running at over 100 degs but this is the highest.

Regards

FEG
 
Sort by date Sort by votes
Max surface temp for T4 is 135 C. I don't think you have too much to worry about.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

b2man63
  • Locked
  • Question Question
Suggest me changing 8 pole 3 phase 7.5kw motor to 2 pole motor advisable.
Replies
6
Views
291
zlatkodo
zlatkodo
sparkyMV
  • Locked
  • Question Question
Looking Siemens, CEMP, ABB Motor Supplier
Replies
4
Views
279
Feg
Feg

Part and Inventory Search

Sponsor

Back
Top