Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ccr

Status
Not open for further replies.

MIANCH

Chemical
Joined
Aug 8, 2002
Messages
162
Location
LY
in my refinery we are operating cyclemax ccr but we are
faceing the problem of seal loss. can you reply me with throtical approch.
thanks
 
You may impose several potential problems.

One is to check the action of the Hydrogen
Flow Cintrol valves around the seal system.

The other is to check the size of stand pipe
diameter whether this is too big or not.

Finally, shut-down and see the internal for
anything wrong.

Good Luck!!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top