We have an assembly consisting of 20 subassemblies. There are drawing views containing any combination of these views. We want to generate Names of these subassemblies in the views. If a view contains 3 subassemblies, then there should be 3 texts displayed on drawing sheet, texts pointing to the 3d origin point of the assemblies. Can someone give hint on how to proceed.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Catia VBA : Search SubAssebly in drawing view
- Thread starter man2007
- Start date
- Thread starter
- #2
There was a Typo error:
We have an assembly consisting of 20 subassemblies. There are drawing views containing any combination of these subassemblies. We want to generate Names of these subassemblies in the views. If a view contains 3 subassemblies, then there should be 3 texts displayed on drawing sheet, texts pointing to the 3d origin point of the assemblies. Can someone give hint on how to proceed.
We have an assembly consisting of 20 subassemblies. There are drawing views containing any combination of these subassemblies. We want to generate Names of these subassemblies in the views. If a view contains 3 subassemblies, then there should be 3 texts displayed on drawing sheet, texts pointing to the 3d origin point of the assemblies. Can someone give hint on how to proceed.
AlexLozoya
Aerospace
I been trying to do it by BVA with no success..
maybe you could use Text Template to accomplish it.
______
Alex ,
maybe you could use Text Template to accomplish it.
______
Alex ,
- Thread starter
- #4
I got some info here, but was unable to find DftGenInterfaces Library
- Thread starter
- #5
Can someone suggest where can I get DftGenInterfaces Library mentioned in the link:
- Status
Similar threads
- Question