CATIA V5 - Part Design - Sketcher - Toggling Hide/Show Construction Geometry

[Ratinoff]

In CATIA V5 R26 Part Design Workbench, inside Sketcher, is there a button that can be pressed that toggles hide/show of Construction Geometry? Similarly, is there a button toggles hide/show of Geometric Elements (lines, circles, points, etc. not set in Construction)?

 

[MrCATIA]

I'm not aware of either capability in CATIA V5.

You could probably accomplish the hide/show toggle with layers and filters. Or having additional sketches shown/hidden in the background.

You might be able to write some macros that do this. One macro to hide all construction geometry, and another macro to show all hidden construction geometry.