Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Catia V5 Icons Disappearing

Status
Not open for further replies.

TheMan51

Automotive
Joined
Feb 8, 2007
Messages
109
Location
US
How would I recover disappearing icons?
Specifically my chamfer/fillet icon disappears.
Any suggestions?
Thanks much
 
Try Tools->Customize->Toolsbars and press Restore all contents. Or you can delete your Catia settings.
 
after You finished customizing icons just mark your catsettings read only...
 
I have had the same issue with disappearing icons. Restoring your contents is fine as long as you haven’t customised your tool bars.

The best way I have found is to get the layout of your tool bars and icons as you like them and then take a copy of your CATSettings then when they move or disappear again just copy them back.


 
i would setup an environment with default catsettings... you can easily share the environment with other users.

and clean usercatsettings when they are corrupted. (after closing catia)

find out about settings up env. in the forum or in the online doc.

Eric N.
indocti discant et ament meminisse periti
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top