Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Catia V5 Drafted Pad Icon

Status
Not open for further replies.
TheMan51

TheMan51

Automotive
Joined
Feb 8, 2007
Messages
109
Location
US
I am attempting to create a drafted circular pad.
The sketch is a circle. I would like to extrude this
with an accompanying 5 degree draft angle. Does anyone know the best way to accomplish this?
Thank you in advance...
 
Sort by date Sort by votes
Proper training would benefit you greatly, but - Part Design workbench, Pad icon. Second command - Draft Angle icon.
Without icons - Part Design workbench, Insert--Sketch based feature -- Pad. Second command - Insert -- Dress up Feature -- Draft.

Regards,
Derek
 
Upvote 0 Downvote
You can also use the drafted filleted pad definition icon. I turned of all of the fillet options and it looks like it works.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
  • Question Question
CATIA V5 ASSEMBLY DESIGN CONSTRAINS
Replies
4
Views
6K
ferdo
ferdo
H
FROM CATIA V5 TO MAXSURF
Replies
0
Views
254
Hamzamd
H
R
  • Question Question
CATIA V5 Automation creating Dimension
Replies
1
Views
1K
qiushui
qiushui
A
  • Locked
  • Question Question
CATIA v5 DRAFTING
Replies
5
Views
7K
amadali
A
D
Catia V5 Drawing uppercase
Replies
2
Views
1K
Rickyt
R

Part and Inventory Search

Sponsor

Back
Top