Catia text management

[CAD2015]

Hi,

I need to recreate the text placed in the Main View(please, see the attachment)
It looks like the text has been converted in curves (probably as result from a CGM Conversion File)
The issue that I am asking your help for is regarding my desire to recreate the text in one text format.
I had to create three (3) different texts cell in order to get them closer to the original shape.
I didn’t finish.........

Thanks

 

[jackk]

what release is the attached CATDrawing file?

could you attach an image of the text your trying to recreate

 

[CAD2015]

Here we go, Jackk.
Thanks

 

[jackk]

Looks like pretty common set of drawing notes.

If the text has been vectorized, you will probably have to re-type it as a new Text in CATIA (unless you have some charactor recognition software).

You should be able to get all 14 notes into one piece of Text. Adjust the Font and Text Size to match.

Maybe I don't understand the problem ?

 

[CAD2015]

Jackk,
Thanks a lot for your help; a star for your post!