Aug 6, 2010 #1 polar123 Aerospace Aug 6, 2010 1 why I cannot mesh a part with 2 bodies in Catia? what I am doing wrong?
Aug 9, 2010 #2 itsmyjob Mechanical Apr 11, 2002 2,375 Welcome to CATIA. Only the PartBody (no other Body) can be meshed in CATIA. Work with CATProduct and 1 body per part. Eric N. indocti discant et ament meminisse periti Upvote 0 Downvote
Welcome to CATIA. Only the PartBody (no other Body) can be meshed in CATIA. Work with CATProduct and 1 body per part. Eric N. indocti discant et ament meminisse periti
Sep 14, 2010 #3 156Alpha Mechanical Sep 11, 2010 8 Hi, Can any of you guys help with how to create a assemble analysis file with only 2 parts. I am happy with a single part analysis but cannot understand how to connect the 2 parts in the analysis mode. can anyone help with the procedure on how to Alpha Upvote 0 Downvote
Hi, Can any of you guys help with how to create a assemble analysis file with only 2 parts. I am happy with a single part analysis but cannot understand how to connect the 2 parts in the analysis mode. can anyone help with the procedure on how to Alpha
Sep 14, 2010 #4 itsmyjob Mechanical Apr 11, 2002 2,375 did you check the online doc? Eric N. indocti discant et ament meminisse periti Upvote 0 Downvote
Sep 14, 2010 #5 156Alpha Mechanical Sep 11, 2010 8 Yes read them but not sure on the process But had some advice from other forum guys and hope that their info helps. but feel free to add any info. Alpha Upvote 0 Downvote
Yes read them but not sure on the process But had some advice from other forum guys and hope that their info helps. but feel free to add any info. Alpha
