Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Catia GSD - Join management

Status
Not open for further replies.
CAD2015

CAD2015

Automotive
Joined
Jan 21, 2006
Messages
2,079
Location
US
Hi,

I'd like to join the highlighted elements.
I got the message below.
Where am I wrong?

image_hahdr4.png


Thanks!

CAD 2015
 
Sort by date Sort by votes
You need all curves to be trimmed to each other. Looks like your line and 2 splines share common endpoints (good). This generates 1 domain. Your 2 corners are not sharing endpoints, this generates 2 more domains. Your line and splines need to be trimmed to your corners and it should work.
 
Upvote 0 Downvote
untick the "check connexity" , if you do need to join things that are not adjacent

regards,
LWolf
 
Upvote 0 Downvote
As Ricky said: edit Corner1 and choose the Trim Element 1 and Trim Element 2 options. Repeat with Corner2 This will give you a good Join with 1 domain.
 
Upvote 0 Downvote
Thank you all!
Have a nice weekend!
image_abvf0n.png


image_kmsejd.png


CAD 2015
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
GSD UAV Fuselage
Replies
2
Views
1K
MrCATIA
M
G
trigger catia
Replies
4
Views
3K
Little Cthulhu
Little Cthulhu
CAD2015
  • Question Question
3DEXPERIENCE - Catia on cloud.........
Replies
5
Views
9K
CAD2015
CAD2015
A
  • Question Question
CATIA SKETCH GRAPHICS
Replies
3
Views
6K
jackk
jackk
B
  • Question Question
Catia Bom listing reports
Replies
0
Views
5K
bambam54
B

Part and Inventory Search

Sponsor

Back
Top