Thirumalai93
Mechanical
- May 11, 2013
- 6
Caster,camber and Kingpin inclination of offroad suspension with 6" bump and 4"droop?..
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
caster
- Thread starter Thirumalai93
- Start date
- Status
30 degrees, zero and zero.
GregLocock
Automotive
Front or rear?
one suggestion for static settings for front suspension at design would be
enough castor so it never goes negative
enough camber that it never goes positive with respect to the ground
KPI as little as possible
but I think you need to describe the problem much better
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
one suggestion for static settings for front suspension at design would be
enough castor so it never goes negative
enough camber that it never goes positive with respect to the ground
KPI as little as possible
but I think you need to describe the problem much better
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
- Thread starter
- #4
Thirumalai93
Mechanical
- May 11, 2013
- 6
What will be the percentage of anti-dive for baja buggy vehicle? any calculations
- Status
Similar threads
- Locked
- Question