Guest
Does anyone know a good resource for casting acrylic prototypes? I'm making a durable optically clear dome, and would like to use RTV tooling at this point in the product development process.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Like2Strike
Mechanical
Normally, Acrylic Domes are manufactured through either Injection molding or Thermoforming. I know of only one company that can Thermoform a dome and get it right. There is a narrow window to work with when forming Acrylic in that manner. I do not offer any casting process for Acrylic Domes. If you change your mind about the casting process, let me know.
Live Aloha Frank M.
Tradewind Resources
Live Aloha Frank M.
Tradewind Resources
- Status
Similar threads
- Locked
- Question
- Locked
- Question