Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cast In-Situ Bored Pile

Status
Not open for further replies.
Kpaudel

Kpaudel

Geotechnical
Joined
Oct 3, 2012
Messages
47
Location
NP
Is there any american or European codes for analysis and design of Cast In-Situ Bored Pile? Concern over Bearing Capacity of Concrete Bored pile in complex soft strata...Combination of alternate layer of sand and clay...
 
Sort by date Sort by votes
Which model or method is most appropriate for cast insitu bored pile?
 
Upvote 0 Downvote
A seminal paper on that is Fred Kulhawi's article in Fang's foundation Engineering handbook, it treats the case of drained analysis in phi-c soils, with an example.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

pelelo
  • Question Question
Auger cast pile with no rebars
Replies
8
Views
8K
dik
dik
jochav52802
  • Question Question
Pile-to-Pile Cap Lateral Shear Breakout Calculation
Replies
3
Views
674
HTURKAK
HTURKAK
Boiler106
  • Question Question
Augercast Pile Minimum Diameter for stability
Replies
4
Views
3K
ANE91
ANE91
killswitchengage
  • Locked
  • Question Question
The suitable technology of pile installations
Replies
0
Views
3K
killswitchengage
killswitchengage
mte12
  • Locked
  • Question Question
Allowable lateral deflection bored/CFA piles
Replies
6
Views
1K
mte12
mte12

Part and Inventory Search

Sponsor

Back
Top