Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Carbon Steel Stress 1
- Thread starter AndreChE
- Start date
-
1
- #2
Pressure Vessel Handbook, by Eugene F. Megyesy, Tenth Edition
for internal pressure on page 22,
t = PR / SE+ 0.4P
WHERE)
P = DESIGN PRESSURE OR MAX ALLOWABLE WORKING PRESSURE
S = STRESS VALUE OF MATERIAL PSI SEE ASME PATE D
E = JOINT EFFICIENCY
R = OUTSIDE RADIUS
D = OUTSIDE DIAMETER
t = WALL THICKNESS
C.A. = CORROSION ALLOWANCE
for internal pressure on page 22,
t = PR / SE+ 0.4P
WHERE)
P = DESIGN PRESSURE OR MAX ALLOWABLE WORKING PRESSURE
S = STRESS VALUE OF MATERIAL PSI SEE ASME PATE D
E = JOINT EFFICIENCY
R = OUTSIDE RADIUS
D = OUTSIDE DIAMETER
t = WALL THICKNESS
C.A. = CORROSION ALLOWANCE
- Status
Similar threads
- Question
- Question