Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Caprolan RC vs. Fibermesh Fibers
- Thread starter gyoung
- Start date
Caprolan-RC is a Nylon 6 product produced by Honeywell. It is made with virgin nylon 6 and is produced specifically for fiber reinforcement of concrete. Quality parameters are monitored closely to ensure the product is the same on all shipments. It is not product downgraded from other intended uses as can be the case in some other products.
nylon fibers absorbs water during mixing process.
therefore it is effective the water / cement ratio.
Wo do not recommend to use nylon fibers
however other fibers like polyfibers (polypropylene) have much better performance.
ýn you question, it is not clear that which purpose will you use fibers in concrete...
Please send me an email to discuss your project spiengtr@ttnet.net.tr
Murat ERBAS / Electrical Engineer M.B.A.
SPI Engineering & Foreign Trade Ltd.
Acibadem AYPIM POB 242 Istanbul 81020 Turkey spiengtr@ttnet.net.tr
Tel : +90.216.342.76.07
therefore it is effective the water / cement ratio.
Wo do not recommend to use nylon fibers
however other fibers like polyfibers (polypropylene) have much better performance.
ýn you question, it is not clear that which purpose will you use fibers in concrete...
Please send me an email to discuss your project spiengtr@ttnet.net.tr
Murat ERBAS / Electrical Engineer M.B.A.
SPI Engineering & Foreign Trade Ltd.
Acibadem AYPIM POB 242 Istanbul 81020 Turkey spiengtr@ttnet.net.tr
Tel : +90.216.342.76.07
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
