Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can't Change Color Of Dimensions 1

Status
Not open for further replies.

SDO

Mechanical
Joined
Sep 4, 2001
Messages
57
Location
CA
Hi,

I am working with SW2004 SP2.0 under WinXP.
Regardless of the setting of the dimension colors (Tools / Options / Colors) or the settings related to the layer I am working on, the driven dimensions appear red.
The only way I can change the driven dimension color is to select it then click Line Color and select "Default". At this time the dimension gets the color of the Layer it is on.

How can I get the dimensions to have by default the color set in Tools / Options / Colors / Driven Dimensions, or the color of the layer it is on (and how did they get to be always red-or a specific color)?

Thank you,
Sorin
 
Go to your Line Format toolbar and click on "Color Display mode" This will and should toggle the color back to the proper default color in your Tools\options.

Regards,

Scott Baugh, CSWP [borg2]
CSWP.jpg

faq731-376
 
Thanks a lot Scott, that did it.
As usual you're the man...

Regards,
Sorin
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top