We've found that once material is added to a catpart, a material parameter appears in the parameters node of the tree. If and when we remove material from the catpart, the material parameter remains with a value of 'none'. We can't delete that parameter. Obviously, it's not a big deal; but, we would like to know if there is a way to remove/delete the empty parameter.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Can we delete the material parameter in the tree?
- Thread starter l3ob
- Start date
weavedreamer
Automotive
Not sure if you can or not, but you certainly may if you desire.
f(x) will permit you to hide the parameter where it will not be visible in the specification tree.
With a few more clicks, the actual parameter can be made to dissappear before your very eyes.
Use Insert in New to move your features as needed.
Delete the Assembly when done.
Promote the Body.
Delete the Material Parameter'd Body.
f(x) will permit you to hide the parameter where it will not be visible in the specification tree.
With a few more clicks, the actual parameter can be made to dissappear before your very eyes.
Use Insert in New to move your features as needed.
Delete the Assembly when done.
Promote the Body.
Delete the Material Parameter'd Body.
this question has been asked before:
weavedreamer
Automotive
You might want to reference this one as well:
Sorry if I misunderstood your question, l3ob.
Sorry if I misunderstood your question, l3ob.
- Status
Similar threads
- Locked
- Question