Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can Finish mark be defined for a long profile using reference letters and between symbol.

Status
Not open for further replies.
Sujit_pawar

Sujit_pawar

Mechanical
Joined
Apr 4, 2020
Messages
1
Location
IN
Can Finish mark be defined for a long complicated and continuous profile using reference letters and a between symbol.( A ↔ B)
 
Sort by date Sort by votes
I don't see why not. However, it's best to have a defined area as it can be unclear where 'A' or 'B' starts assuming an uninterrupted profile.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

G
nX / nSURFACES notation can be used for all the GD&T character?
2
Replies
20
Views
12K
pmarc
pmarc
Gaganaut06
  • Locked
  • Question Question
Can we combine hole table and GD&T position tolerance symbol
Replies
9
Views
5K
pmarc
pmarc
greenimi
  • Question Question
AVG and F symbol - fig 8-14/2018
2
Replies
25
Views
2K
mfgenggear
mfgenggear
dogbural
  • Locked
  • Question Question
profile tolerance for chamfer and radii
Replies
2
Views
1K
Wuzhee
Wuzhee
AMontembeault
  • Locked
  • Question Question
Profile on a unit basis
Replies
6
Views
3K
Burunduk
Burunduk

Part and Inventory Search

Sponsor

Back
Top