Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

CAM Conversion

Status
Not open for further replies.
MessersmithS82

MessersmithS82

Aerospace
Joined
Aug 2, 2011
Messages
6
Location
US
We are looking into moving from MasterCAM to CATIA for our CAM work and I was needing to know if there was a way to do convert the MasterCAM toolpaths or the generated NC code into CATIA with as minimal effort as possible. The main reason we are doing this is so we can keep the native link back to the Models we recieve from our customers.
 
Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

Arun_Gopala
  • Locked
  • Question Question
CATIA V5 kinematics of Angular adjustment of two coaxial cams
Replies
2
Views
237
Arun_Gopala
Arun_Gopala
M
*** 3dcad forum conversion this weekend starting 2/28 ***
Replies
1
Views
2K
B. David Miyares
B
M
Machining with radius compensations
Replies
0
Views
2K
mattiao
M
T
Catia Cam , NC Machine Simulation
Replies
0
Views
3K
theanswer
T
E
Vrml to STEP conversion
Replies
1
Views
6K
CADCAT00
C

Part and Inventory Search

Sponsor

Back
Top