Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Calling displacement in ABAQUS FRIC subroutine 1

Status
Not open for further replies.
Syed_Baqer

Syed_Baqer

Student
Joined
Mar 12, 2024
Messages
3
Location
IN
Is it possible to call displacement in FRIC subroutine. So that it can be used to change friction parameter.
 
Sort by date Sort by votes
It should be doable with COORDS (integration point coordinates). You could use their previous and current values to calculate displacements.
 
Upvote 0 Downvote
@MadisonCameron your answer looks like AI generated. Pardon me if i am wrong.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

otaviobarodrigues
  • Locked
  • Question Question
ABAQUS pipe-in-pipe contact with friction
Replies
0
Views
3K
otaviobarodrigues
otaviobarodrigues
Syed_Baqer
  • Locked
  • Question Question
Not getting output of STATEV used in FRIC subroutine
Replies
1
Views
191
FEA way
FEA way
shubbad
  • Question Question
Abaqus modelling
Replies
0
Views
1K
shubbad
shubbad
I
  • Locked
  • Question Question
Python script in ABAQUS
Replies
1
Views
4K
Vishakh_Rajendran
Vishakh_Rajendran
AeroEng31
  • Locked
  • Question Question
Applying displacement/strain field as boundary condition in ABAQUS
Replies
4
Views
1K
Zhanglangeba
Zhanglangeba

Part and Inventory Search

Sponsor

Back
Top