Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Calling another CATIA IUA
- Thread starter wn
- Start date
1) Use LOAD, example - to highlight a line
LOAD GIIHLT MNUM,LN,1,IER
If you write your own load modules you should use the Catia "shared" utility to build them. Place them in the "iuamac" directory.
2) Use EXEC to call another IUA, example - to handle the error in your own IUA
EXEC MYERRHND IER
It is always a good idea to read the Catia documentation ;-)
LOAD GIIHLT MNUM,LN,1,IER
If you write your own load modules you should use the Catia "shared" utility to build them. Place them in the "iuamac" directory.
2) Use EXEC to call another IUA, example - to handle the error in your own IUA
EXEC MYERRHND IER
It is always a good idea to read the Catia documentation ;-)
- Status
