Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

CalibratingWinTR-20

Status
Not open for further replies.
chaa

chaa

Civil/Environmental
Joined
Jun 8, 2007
Messages
15
Location
US
Please, does anyone know how you calibrate a WinTR-20 model for known discharges (developed from gauging station records)?
 
Sort by date Sort by votes
Thanks RWF7437. The article is pretty general but I'm sure I'll learn something.
 
Upvote 0 Downvote
You're welcome.

There are other examples including one in the HEC-HMS documentation, as I recall.

good luck
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

fel3
  • Locked
  • Question Question
Weird results from Autodesk Storm and Sanitary Analysis (2014)
Replies
8
Views
1K
fel3
fel3
tsli001
  • Locked
  • Question Question
infoworks icm 2020 to icm v8.5
Replies
0
Views
139
tsli001
tsli001
FarvAC91
  • Locked
  • Question Question
TR-20/WinTR-20 Reservoir Emptying Time
Replies
2
Views
146
puzzler77
puzzler77
TheEnginerd
  • Locked
  • Question Question
Modified Rational Versus TR-20
Replies
11
Views
584
psmart
psmart
broeng
  • Locked
  • Question Question
HEC-HMS 4.1 "Error 20383 Shape is not defined for Subbasin"
Replies
5
Views
303
justinhunt
justinhunt

Part and Inventory Search

Sponsor

Back
Top