Wopshistos
Structural
When loads onto pads give a resultant with an eccentricity outside the kern i am only able to locate formulae that assume single axis bending to determine the base pressure distribution.
There are published charts (Teng etc) that list factors for other cases however i would like to know the basis of the formulae if they exist at all.
Perhaps a member can point me in the right direction or, better still, advise what the formulas are.
There are published charts (Teng etc) that list factors for other cases however i would like to know the basis of the formulae if they exist at all.
Perhaps a member can point me in the right direction or, better still, advise what the formulas are.