Jun 20, 2008 #1 Pump2005 Civil/Environmental Jan 14, 2006 72 I currently have a tester that measures up to 2.20 mg/l. Is there a formula to use when cutting the sample to get a true residual reading?
I currently have a tester that measures up to 2.20 mg/l. Is there a formula to use when cutting the sample to get a true residual reading?
Jun 20, 2008 1 #2 orenda1168 Chemical Dec 12, 2002 234 Yes, pf course. For example, cut the sample to one part original water, three parts DI or distilled water, run your Cl2 test and multiply that result by four. Rule of thumb: original sample parts + dilution water parts = multiplication factor. Orenda Upvote 0 Downvote
Yes, pf course. For example, cut the sample to one part original water, three parts DI or distilled water, run your Cl2 test and multiply that result by four. Rule of thumb: original sample parts + dilution water parts = multiplication factor. Orenda
