Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Calculate nodal average from integration point data

Status
Not open for further replies.
scooke

scooke

Mechanical
Joined
Nov 26, 2019
Messages
15
Location
CA
Hello,

I want to calculate the nodal average data from my SDV's (integration point data) and save this data into field variables.

Does anyone know how this algorithm would look like or how one would go about this?

Thanks!
 
Status
Not open for further replies.

Similar threads

jball1
  • Locked
  • Question Question
Extracting nodal forces
Replies
1
Views
1K
jball1
jball1
chinsan
  • Locked
  • Question Question
Nodal coordinates and the strains at the nodes
Replies
5
Views
726
chinsan
chinsan
mj345
  • Locked
  • Question Question
Importing point co ordinates in ABAQUS
Replies
1
Views
2K
FEA way
FEA way
IcarusAero223
  • Locked
  • Question Question
XFEM in Abaqus/Standard for 3D CFRP layup - nodal level set value error
Replies
9
Views
3K
FEA way
FEA way
B
  • Locked
  • Question Question
Concentrated Force on a Rigid body reference point
Replies
2
Views
3K
Vishakh_Rajendran
Vishakh_Rajendran

Part and Inventory Search

Sponsor

Back
Top