Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
CAD & Vis Mockup 1
- Thread starter CAD2015
- Start date
-
1
- #2
JohnRBaker
Mechanical
Besides the issue of scale (the amount of data that can be visualized at once), CAD is where parts are created, including sub-assemblies, and where with Vis Mock-Up, parts and sub-assemblies are combined together to form complete products that can then be visualized.
I hope this helps.
John R. Baker, P.E. (ret)
EX-Product 'Evangelist'
Irvine, CA
Siemens PLM:
UG/NX Museum:
The secret of life is not finding someone to live with
It's finding someone you can't live without
I hope this helps.
John R. Baker, P.E. (ret)
EX-Product 'Evangelist'
Irvine, CA
Siemens PLM:
UG/NX Museum:
The secret of life is not finding someone to live with
It's finding someone you can't live without
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
