Cable Pulling

[wisemanit]

What are the standards using in calculation of cable pulling tension in North America and SWBP? I try to find some information about it if this calculations are respecting standards.
could you please help me out with this(looking for document), I do know the steps how to calculate Tension cable pulling and SWBP.
Thanks

 

[Bilegan]

Hello wisemanit

No idea, anyway check this site, maybe it will help.

http://ecmweb.com/mag/electric_simple_calculations_cable/index.html

Regards
Bilegan

 

[wisemanit]

Thank you Bilegan,I had see that link but still not enough: i'm lookin for this document:
AEIC CG5: Underground Extruded Power Cable Pulling Guide and more if possible to show if this calculations are respecting standards.

Regards

 

[7anoter4]

I think you are looking for an obsolete document:
Specification for Extruded Dielectric Shielded Power Cables Rated 5 through 46 kV
AEIC CS8-07 (3rd Edition) - $70.00 Note: CS8-07 replaces
CS5 and CS6 for 5 through 46kV Cables
See:

http://www.aeic.org/cable_eng/cabspec.html

Regards

 

[jghrist]

7anoter4,
Wouldn't the document Underground Extruded Power Cable Pulling Guide, AEIC CG5-(2nd Edition) - 2005 - $45.00, in your link be the one wisemanit wants?

 

[7anoter4]

You are right jghrist. It seems to me also that for cables less than 5 KV the specification CS5 from 2005 is still valuable.
Thanks.
Best Regards