Bystronic Bysprint 3015 - problem Error E102

[Todor1]

Hello,
I have a problem with Bistronic resonator 2200 - 2004
I have no problems starting the machine
During operation it stops and displays E102
The turbine does not stop working
The machine works everything works - no problem
But the software writes this error - without it
Everything works but there is a mistake

Replaced new parts:
1. Turbo blower
2. Inverter
3. Gas mix

 

[krugtech]

swap the DIO modules with each other. make sure to trasfer th edifpsw settings. you might have an input not responding.

Chris Krug

http://krugtech.com/

Maximum Up-time, Minimum BS