jetray
Industrial
- May 21, 2012
- 8
Hi All,
Has anyone ever had a Gascon warning-"Calbrating" on a Bystronic Autonom 6 KW
Laser is up and runnning , Byvision is all good with a plan loaded but it
hangs after edge detect and even after restart same thing.
Thanks Jetray
Has anyone ever had a Gascon warning-"Calbrating" on a Bystronic Autonom 6 KW
Laser is up and runnning , Byvision is all good with a plan loaded but it
hangs after edge detect and even after restart same thing.
Thanks Jetray