Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

burner ignition system design

Status
Not open for further replies.

hossamar1

Mechanical
Joined
Mar 15, 2003
Messages
1
Location
EG
Please help me in finding any technical specfiction of simple dual fuel burner ignition system
 
I'm not quite sure what you exactly require. Generally for simple systems it will be an ignition spark (10KV) lighting either gas or oil. It may be direct ignition or could involve a pilot depending on the type, size and application.

Or it may be a HESI system using Capacitor discharge??

Then of course you have flame supervision etc etc.

So need more info. Rod Nissen.
Combustion & Engineering Diagnostics
canded@iprimus.com.au
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top