Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bulk part in simplified rep

Status
Not open for further replies.
SENTRYDAN

SENTRYDAN

Mechanical
Joined
Jan 17, 2005
Messages
21
Location
US
I created an assembly with a simplified rep and bulk parts. How do I put the bulk parts into the simplified rep? The BOM in the drawing is set to that simplified rep and won't show the bulk parts.
 
Sort by date Sort by votes
Not sure, but my guess is you can't.

Bulk parts have no geometry so there is nothing in them that can be put into a simplified rep.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

freerangequark
  • Locked
  • Question Question
Control of a dimension or parameter in simplified rep?
Replies
1
Views
2K
3DDave
3DDave
whatev-nvm
  • Locked
  • Question Question
OBJ of a simp rep of an assembly gets exported with incorrect coordinate system
Replies
0
Views
1K
whatev-nvm
whatev-nvm
freerangequark
  • Locked
  • Question Question
Error in start part relations
Replies
15
Views
2K
freerangequark
freerangequark
freerangequark
  • Locked
  • Question Question
Model Tree, tracking part identity
Replies
2
Views
2K
geesaman.d
geesaman.d
Mras
  • Locked
  • Question Question
Creo part tolerance (point coincidence tolerance)
Replies
1
Views
1K
3DDave
3DDave

Part and Inventory Search

Sponsor

Back
Top