Bulk Modulus of Hexene & Propylene Oxid

[stanier]

I am searching for the bulk modulus of hexene and propylene oxide. SI Units preferred.

I need the information to determine the wavespeed in a surge analysis.

Geoffrey D Stone FIMechE C.Eng;FIEust CP Eng

http://www.waterhammer.bigblog.com.au

 

[BigInch]

stanier,

For hexene you can use the formula for hydrocarbon liquids posted at this thread,

http://www.eng-tips.com/viewthread.cfm?qid=159698

I have nothing on propylene oxide. You might want to cross reference this question on the petroleum engineering - "other topics" forum. Do you have viscosity data points for propylene oxide? Just curious what fluid type classification it falls into.

Going the Big Inch!

http://virtualpipeline.spaces.msn.com

 

[stanier]

Hi BigInch,

Thanks, I got the information I needed from AFT's Chempak.

PO is UN # 1280 transport Class # Packaging Group 1 Storage Class 3. Your mnay know by other names such as 1,2 Epoxy Propane.

Geoffrey D Stone FIMechE C.Eng;FIEust CP Eng

http://www.waterhammer.bigblog.com.au