Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

building your model using copying or ?

Status
Not open for further replies.
gherghi

gherghi

Structural
Joined
Jul 21, 2005
Messages
1
Location
US
I am a new user of Patran. My structure is repeated many times. I want to use copy/paste type operation to build the entire model. What is the best way of doing this so that all element/material properties are retained. All my elements are beams and plates.
 
Status
Not open for further replies.

Similar threads

lavecchiasignora
  • Locked
  • Question Question
Read or Import a set of nodes
Replies
1
Views
894
dmapguru
dmapguru
MihaelaN
  • Locked
  • Question Question
Threaded connections modelling with frictional contact in Patran/ Nastran
Replies
0
Views
2K
MihaelaN
MihaelaN
MrRogers1987
  • Locked
  • Question Question
Getting Model Info from Patran Database .db
Replies
8
Views
1K
dmapguru
dmapguru
Kevin_O
  • Locked
  • Question Question
Differences in results using SHELL EQUIVALENT SECTION
Replies
0
Views
303
Kevin_O
Kevin_O
enghelp2806
  • Locked
  • Question Question
Procedure for sizing a structure using extracted shell forces
Replies
0
Views
314
enghelp2806
enghelp2806

Part and Inventory Search

Sponsor

Back
Top