Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Building interconnections for RF Systems

Status
Not open for further replies.

Shavner

Electrical
Oct 1, 2002
28
I am working on a job that is replacing an antiquated McCollough loop system with RF transcievers. This is a large site with storage warehouses. Is there a distance limitation to interconnect multiple buildings (FACPs) to a single Transmitter in NFPA. I have been thru both 70 & 72 and cannot find a difinitive answer. The code Art. 760.7 only points to Art. 800 (I II and IV) for conductor installation techniques but dose not give length restrictions. Is there a length restriction or a physcical limitation between the FACP and Transmitter?
 
Replies continue below

Recommended for you

Probably not as NFPA deals with life safety not design. Maybe a IEEE reference would help.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor