Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Budget Cost for Watermain Installation (Scotland)

Status
Not open for further replies.

Ussuri

Civil/Environmental
May 7, 2004
1,582
I am looking for some budgetting information to get a rough cost for installing a MDPE water main. We would be looking at 63mm diameter pipe, approximately 900mm cover, total length around 1.3km.

Does anyone have up to date costs (2010) per linear metre, including for materials, trench excavation, bedding, backfill, labour costs etc?

The route will have a few high and low spots, but is through farmland so installation should be relatively straight forward. Location is North East Scotland.

If anyone has a 'go by guide' it would help me to assess a budget cost.

Cheers
 
Replies continue below

Recommended for you

Not much help, but in northeast Florida that would be about $8 per foot, mostly labor.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor