Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

buckling analysis with NASTRAN: offset?

Status
Not open for further replies.
minny

minny

New member
Joined
Nov 1, 2008
Messages
26
Location
IT
Hello
I'm running a buckling analysis of a wing main box.
The skin, rib and spar have been modeled with CDUADs.
My I use the offset for the CQUAD? Does the offset cause an error in evaluation of the eigenvalue?
 
Status
Not open for further replies.

Similar threads

N
  • Question Question
Patran/Nastran Buckling Analysis – SYSTEM FATAL MESSAGE 7340 (LNNHERR)
Replies
1
Views
6K
ThomasH
ThomasH
N
  • Question Question
Nonlinear Buckling Analysis after Pretensioning (Wrinkling Study – Patran/Nastran SOL 400)
Replies
0
Views
5K
Nic0
N
S
  • Question Question
Buckling with Inertia Relief
Replies
5
Views
5K
sdm919
sdm919
sivasooriyan
Reg. property groups in Autodesk Nastran
Replies
1
Views
8K
IRstuff
IRstuff
sivasooriyan
  • Question Question
Reg. property groups in Autodesk Nastran
Replies
0
Views
8K
sivasooriyan
sivasooriyan

Part and Inventory Search

Sponsor

Back
Top