Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bubble numbers

Status
Not open for further replies.

RegnadKcin

Mechanical
Joined
Jan 24, 2007
Messages
18
Location
US
The bubble number verification on the Bills of Material table shows that all parts are bubble numbered, however in instpecting the drawing sheets we discover that this is not the case. Some parts are not bubble numbered, but the Bill of Material table indicates that everyting has a bubble number. Has anyone had this problem?
 
Actually I had a "DUH" moment. If you select the view tab in the menu there is a SHOW/HIDE ANNOTATIONS command that will show if any bubble numbers are hidden. We have our drawings created offshore and for some reason they hid some of the bubble numbers. You get what you pay for.
Thanks for the reply.
 
Actually we are using 2012 about to upgrade to 2013. Always behind the times.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top