Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations Danlap on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

BS, BS EN, ASTM Standards comparison

Status
Not open for further replies.

mcniven180

Materials
Jun 12, 2006
1
I'm trying to find a website, or technical datasheet that will indicate the equivalent standards of one another.

i.e if I'm looking for BS EN 1563, is there a chart available the shows standard equivalents?

Is there such a website?
 
Replies continue below

Recommended for you

Sorry!

The standard agencies started in different locations. The USA established standards based upon needs. The UK, France, Germany, Japan etc. went through similar development - Independently. No magic cross references - no super web sites. You need research and luck or the pertinent standards.

The BS standard title is Founding - Spherical graphite cast irons-AMD 14004: November 1, 2002; Supersedes BS 2789: 1985; Similar standards exist under several of the European agencies and New Zealand. Similar US standards may include ASTM A 536 -Standard Specification for Ductile Iron Castings; ASTM B 320 Standard Practice for Preparation of Iron Castings for Electroplating, ASTM D 4512.

Look for ASTM on the web for titles and word search. A 247 is Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings, A 842 is Standard Specification for Compacted Graphite Iron Castings. Also the American Welding Society standard A5.15 is Specification for Welding Electrodes and Rods for Cast Iron.
 
Perform a search at this site. There are some standard references for this, like Stahlschl[ü]ssel and Woldman's and Worldwide Guide to Equivalent Irons and Steels.

You can find these at the ASM International Internet site:


A word of caution - these are alloy cross references, not product cross references. As JLSeagull stated, it takes a lot of work to search for alternatives/equivalents.

Regards,

Cory

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor